Equipment Checklist for AASHTO M 201
Moist Cabinets, Moist Rooms, and Water Storage Tanks

 
All equipment shall be inspected for compliance with appropriate dimensions, as stated in each standard, as well as to determine if it is in satisfactory operating condition (i.e.; adherence of mortar, deformed molds, etc.). Inspection shall occur at least annually, or whenever there is reason to suspect nonconformance with the standard.

 

 

  Item

Moist cabinets, moist rooms

  Description  
     
  Calibration Item See the AASHTO Standard
  Calibration Procedure  
  Calibration Interval  
 

  Item Calcium hydroxide saturated water storage tanks
  Description  
     
  Calibration Item Saturation
  Calibration Procedure Thourghly stir and replace water and lime solution
  Calibration Interval stir at least once a month, solution replacement not to exceed 24 months
 

  Item Thermometer
  Description Used to monitor the temperature in the cabinets, rooms, and water tanks
     
  Calibration Item Reading
  Calibration Procedure See Section 4.1.2
  Calibration Interval  
 

  Item Heating and cooling devices
  Description Used to control the temperature in the cabinets, rooms, and water tanks
     
  Calibration Item none stated
  Calibration Procedure  
  Calibration Interval  
 

  Item Humidty control
  Description Used to control the humidity in cabinets and rooms
     
  Calibration Item none stated
  Calibration Procedure  
  Calibration Interval  
 

  Item Humidity recording devices (optional)
  Description Used to monitorl the humidity in cabinets and rooms
     
  Calibration Item none stated
  Calibration Procedure  
  Calibration Interval